ic programmer|chip test|automated programmer system|Automated Device Programmers

Acroview Technology, a leader in chip programming, has announced an expansion of its compatible chip model range alongside the release of its latest programming software. Among the newly supported devices, the universal programming platform AP8000 has been fully adapted for HPMicro's high-performance microcontroller HPM6264IEP3, providing customers with efficient and reliable professional programming support.

The HPM6264IEP3 is a high-performance, highly real-time, mixed-signal, dual RISC-V core microcontroller from Shanghai HPMicro Semiconductor Co., Ltd. It features a 100ps high-resolution PWM output module and a programmable logic array (PLA) for complex signal generation, enabling digital power supplies and high-performance motor control in industrial and automotive applications.

Features

• Dual-core 32-bit RISC-V processors

-- Supports RV32-IMAFDCP instruction set

-- DSP unit with SIMD and DSP instructions

-- 32KB L1 instruction cache and 32KB L1 data cache each

-- 128KB instruction local memory (ILM) and 128KB data local memory (DLM) each

• Embedded memory

-- Total 800KB on-chip SRAM, including general-purpose memory and CPU local memory

-- 4096-bit OTP

-- 128KB BOOT ROM

• Power and clock

-- Multiple on-chip power supplies, including DCDC and LDO

-- Low-power modes: Run, Wait, Stop, Standby, and Shutdown

-- 24MHz and 32768Hz crystal oscillators

-- 3 PLLs with fractional division and spread spectrum support

• External memory interface

-- 1 serial bus controller (XPI) supporting various external serial Flash

• Enhanced PWM system

-- 2 high-resolution PWM timers with 100ps precision

-- 2 PWM timers with 3.0ns precision

-- 4 quadrature encoder interfaces and 4 Hall interfaces

-- 2 programmable logic arrays (PLA)

• Timers

-- 5 groups of 32-bit general-purpose timers

-- 3 watchdogs

-- Real-time clock

• Communication interfaces

-- 9 UARTs, 4 SPIs, 4 I2Cs, 4 LINs

-- 1 USB 2.0 OTG with integrated HS-PHY

-- 4 CAN controllers with CAN-FD support

• High-performance analog peripherals

-- 3 ADCs, 16-bit / 2MSPS, configurable to 12-bit / 4MSPS, with 24 pins available as ADC inputs

-- 2 12-bit DACs, 1MSPS

-- 4 analog comparators

-- Σ∆ digital filter (SDM) and SINC digital filter

• I/O

-- 108 GPIOs

-- I/O supports 3.3V and 1.8V

• Information security

-- AES-128/256 encryption/decryption engine supporting ECB and CBC modes

-- SM2, SM3, SM4

-- SHA-1/256 hash module

-- True random number generator

-- NOR Flash real-time decryption

System block diagram

The AP8000 universal programmer, independently developed by Acroview Technology, has become a benchmark professional programming solution in the industry. The device supports flexible and adjustable 1-to-1 and 1-to-8 configuration modes, and offers both online and offline operation modes. It also features dedicated programming solutions for memory chips such as eMMC and UFS, and fully covers the bare-chip offline programming and on-board programming needs of HPMicro's entire chip series. The AP8000 adopts an innovative modular design with three core modules—main unit, baseboard, and adapter—granting outstanding compatibility and expandability. As a universal programming platform, it not only adapts to various programmable chips on the market but also serves as a core component of Acroview's automated batch programming system IPS5800S with stable and high‑efficiency performance, capable of handling large‑scale chip programming tasks to meet mass production requirements.

The AP8000 main unit offers flexible connectivity, equipped with both USB and NET interfaces for convenient networking of multiple programmers. Through networking, users can easily achieve synchronized control of multiple programmers for efficient parallel programming operations. In terms of safety, the main unit is built with an intelligent safety protection circuit that monitors chip placement status and circuit connections in real time. Once abnormalities such as reverse insertion or short circuits are detected, it triggers an immediate power‑off protection mechanism, ensuring the safe operation of both the chip and the programmer. The main unit features a high‑speed FPGA chip that significantly enhances data transmission and processing efficiency, ensuring a smooth and efficient programming process. For added convenience, an SD card slot is provided on the rear panel. Users can store project files generated on a PC to an SD card, insert it into the slot, and then use the physical buttons on the programmer to select, load, and execute programming operations, enabling standalone operation without a PC. This design not only reduces dependence on computer hardware but also simplifies workspace setup and greatly improves operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular baseboard‑and‑adapter board design, effectively extending the main unit's functionality. The device currently supports products from all major semiconductor manufacturers, covering brands such as HAAWKING, XHSC, ZHIXIN, SAMSUNG, KIOXIA, and others. Its supported device types are extensive, including NAND, NOR, MCU, CPLD, FPGA, eMMC, and more, and it is fully compatible with industry‑standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one‑stop, full‑scenario chip programming solution.

Company Introduction

About HPMicro: HPMicro Semiconductor was founded in 2020 and is dedicated to high‑performance embedded solutions, with products covering microcontrollers, microprocessors, and peripheral chips, as well as supporting development tools and ecosystems. The company has already mass‑produced two high‑performance general‑purpose MCU series—HPM6700/6400, HPM6300, and HPM6200—which outperform international counterparts and have achieved AEC‑Q100 certification, serving China's industrial, automotive, and new energy markets.

About Acroview Technology: Acroview Technology is a national "Specialized and Sophisticated" "Little Giant" enterprise engaged in the R&D, manufacturing, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain—including Fabless, IDM, OSAT, wafer fabs, and end‑device manufacturers—through innovative semiconductor testing technologies and solutions. Acroview's pioneering fully automated burn‑in test system (Auto Burn‑In, ABI) significantly improves chip burn‑in efficiency and reduces per‑DUT test costs. The company also provides equipment and solutions across various stages, including PSV, CP, FT, ABI, SLT, and programming. By seamlessly integrating technological leadership, system‑level expertise, and a globally deployed R&D and sales service network, Acroview creates value for customers to gain a competitive edge in the market.